Menu
[ Catalog Index ] |
MauserReference Page |
[ Actions | Barrel Threads | Firing Pins | Extractors| Bolts ] To see Our MauserParts for sale go toMauser Parts To see Our Mauser Actions forsale go toActions Large Ring / Small Ring actions size is determined by the diameter ofthefront receiver. Refer to below for Action type. |
7x57 Spanish Mauser I got the rifle many years ago for free with no bolt or sights and a cracked up sporterized mil. Over the years I did work on it, bought a bolt for 20 bucks, pulled the barrel and stripped the old rusted up blue off and set the head space to.004. Mauser worked in an arms plant prior to entering the German Army in 1859. Working with his brother Wilhelm Mauser (1834-1882), he developed a needle gun that was adopted by the German Army in 1871. Mauser's first successful design was a single-shot, 11mm, bolt-action rifle that became the forerunner of many improved designs. I recently acquired a Spanish Mauser which after a little research turns out to be a Model 1916. The person I bought it from said it is a 308. Underneath the front sight just sort of the barrel is stamped Oviedo Spain M1916 SAMCO MIA FL 308W I have read a great deal of opinions discussing commercial 308 Winchester as being too hot for these rifles.
Mauser Actions |
---|
1) Small Ring M-1893-1896 1.30 indiameter are 8.50 in length, Straight side walled receiver with screwspacingof 7.620. Small ring have a threaded shank diameterof .980 in. With 12 threads per inch. These include M-93-96 by Spain, Sweden, Germany. Spanish M-93 boltshave flat bottom, DWM M-95 bolt faces are round. Swedish boltsM-38/94/96 will fit only Swedish. Receiver stripped weight 13.0 Oz. Note stright side of receiver front to rear .Oval Gasrelease cut on left side of receiver 2) M1910, M1936 Mexicans by FN and Mexico, 1.30 diameter. receiverring, 8.50 in length, with screw spacing of 7.620. Barrel Shank .980 Small ring have a threaded shank diameter of .980 in. With 12 threadsper inch The barrel is a 4-groove with a twist rate of 1:9 Receiver is slightly different from other Small Ring. Mauser (Boltswill not interchange with any other type Mauser). Receiver strippedweight 15.2 oz. Note stright side of receiver front to rear 3) WWI German KAR98A, 1.30 diameter. receiver ring, 8.750 in length, withscrew spacing, of 7.835 ) (7 7/8')(Long action, Small ring). Has a threaded shank diameter of 1.100 in. With 12 threads per inch. WWI German Carbine, Also Polish 98az Uses a standard M-98 Bolt. 4) Intermediate Large Ring M-98 ,(Large ring, Short action) 1.410 diameter. receiver ring, 8.50 in length, with screwspacing of 7.620 Intermediate Large ring have a threaded shank diameter of 1.10 in. With12 threads per inch. Mexicans by FN and Belgium, the M24, M47, M48 by FN andYugoslavia. A large number of M48 Yugoslavian large-ring M98Mauser have recentlybeen dropped on the market. This M-98 short is considered anintermediate action, and WILL NOT fit a Standard 98 Mauser stocksand standard bolts will not interchange. Receiver stripped weight 15.0oz. 5) Large Ring M-98 1.410 diameter receiver ring, 8.750 in length, with screw spacingof 7.835. Barrel Shank of 1.100 Large ring have a threaded shank diameter of 1.10 in. With 12 threadsper inch. Including M-98's from WWI and WW2, GEW-98,M-98k, CZ-24,VZ-24,SpanishM-43/44 . Chilean M1912, Steyr Brazilian M1908/34, Brno 98/22,98/29, DWM /Argentine. M1909, M24/30 Venezuelan, FN M1935 Peruvian,FN StandardModel, Mauser Oberndorf. Receviver stripped weight 15.5 oz. 6) M-33-40 Small Ring, 1.30 diameter. receiver ring, 8.50 in length with screw spacing of7.835. Small Ring Long action. Lighting cuts on sides of receiver. Havea threaded shank diameter of .98 in. With 12 threadsper inch. Also Brno Vz-33, CZ-33/40. Recevier stripped weight 13.4 Oz 6) Mauser Magnums Commercial factory 1.50 in diameter.,9.240in length,have a hole spacing of 8.207. Barrel Shank 1.141 Brevex Magnum. Rareand Pricey. 7) Turkish Mausers there were in manydifferent sizes and configurations. Thereare Intermediateas well as Long actions. Most receivers are large ring but with, small diametertreads, M-1938 Large Ring Same as #5 above, except with a small barrel shank diameter of.98 M-1903 Large Ring Intermediate Same as # 4 above but with Tall clip charger guide,and small barrel shank of .98 M-1893 Small Ring Same as #1 above 8) Argentine 1891 9) Siamese Mauser 1.410 diameter. receiver ring, 8.50 receiver length withscrewspacing of 7.60 Threaded shank diameter of .515' long, .990' in diameter,with14 threads per inch 10) Kurtz (true Short Action) 1.30' Diameter receveir ring, 8 1/4' Action Length. Hole spacingof 6 .60. Very rare, made in Germany pre WW2. 11) Interams Mini Mauser 1.195 diameter receiver ring, 7.25 Receiver length, with screw spacing of 6.25' |
Barrel Configuration |
---|
Barrel Configuration
VZ/CZ-24, FN etc.
Small Ring Mauser .980 diameter. x 12 TPI, .645 length. M-93 thruM-95.
Swedish Mauser .980 diameter. x 12 TPI, .645 length. M-38-94-96
M-91 Argentine .980 diameter. x 12 TPI, .715 Length.
Mauser Chart |
---|
Mauser Reeivers |
---|
1) Small Ring (Spanish)
Notice straight sides
2) Mexican 1910 / 1936
Notice straight sides
3) Mauser KAR98 Carbine
Coming soon
4) Mauser Intermediate (FN Mexican Model 24)
5) Mauser Large Ring 98 (German WW2)
6) Mauser 33-40
![How To Date A Spanish Mauser How To Date A Spanish Mauser](https://s3.amazonaws.com/mgm-content/sites/armslist/uploads/posts/2015/02/13/4027449_04_spanish_mauser_1893_7mm_1909_d_640.jpg)
7) Mauser Turkish Variosus Versions
1890 Carbine and Rifle
1893 Carbine and Rifle
1898/22 Long Rifle
1903 Rifle
1938 Carbine and Rifle
Photos Coming .
8) Argentine 1891
9) Siamese Mauser
Firing pins |
---|
1) Mauser M-98 (Gew98, 98k, kar98, 1909, 33-40, VZ-24 andothers)
7.37 total length, Front 1.984, Rear 5.353
2) Mauser M-48 Yugo Also M-24 Mexican
7.24 total length, Front 2.015, Rear 5.225
7.036 total length, Front 1.730, Rear 5.306
4) Mauser M-1893/95
6.826 total length, Front 1.682, Rear 5.144
7.185 total length, Front 1.742, Rear 5.443
Need Photo
7) Mauser Magnum (True Magnum)
![Mauser Mauser](https://www.milsurps.com/images/imported/2019/08/spanish_mauser_5_14-1.jpg)
Need Photo
Model 48 Yugo conversion from M-98
Extractors |
---|
Yep More Pictures coming soon
1) Mauser M-98 (Gew98,98k,kar98, 1909, 33-40, VZ-24 and others) Wondershare filmora 9 1 0 9 download free.
4.1/4' long, 7/16' wide, side area with groove, 5/16'. groove width7/3'
2) Mauser M-48 Yugo
Same As M-98 above, slightly different radius to bevel
3) Mauser M-1910/36 Mexican
4.1/2' long, 13/32' wide, side area with groove, 1/4'. groovewidth 3/16'
4) Mauser M-1893/95
4.3/16' long, 13/32' wide, side area with groove, 7/32'. groovewidth 3/32'
5) Mauser Argentine M-91
2) Mauser M-48 Yugo
Same As M-98 above, slightly different radius to bevel
3) Mauser M-1910/36 Mexican
4.1/2' long, 13/32' wide, side area with groove, 1/4'. groovewidth 3/16'
4) Mauser M-1893/95
4.3/16' long, 13/32' wide, side area with groove, 7/32'. groovewidth 3/32'
5) Mauser Argentine M-91
6) Mauser M-96 Swede
4.1/8' long, 13/32' wide, side area with groove, 7/32'. groovewidth 1/16'
7) Mauser Magnum (True Magnum)
MISC pictures of extractors
.
Bolts |
---|
Mauser M-91 Argentine
Mauser M-93
Mauser M-95
Same as the M-93 except has a rounded bottom on bolt face.
Mauser M-94 / 38 Swedish
Mauser M-96 Swedish
Mauser M-98 straight bolt Body
Mauser 98k WW 2 Bolt Body
6.25' long
Mauser M-1909 Bolt
How To Date A Spanish Mauser Movie
Mauser 33-40note dished out bolt handle.
Mauser 98 Intermediate Bolt Body
6' long
Mauser M-98a carbine
Bolt has a 90% tun and a handle that is flat and checkered on thebottom.
Mexican M-1910, Straight handle
M-1936, has a sight 30% turndown on bolt handle
Mauser Siamese
For the hard to find Siamese Mauser floor plate use a Japanese M-38 floorplate
modification can be done easily. Check out the link.
Siamesefloor plate Page
Please help with any corrections or additions to this page.
Last up date May 2020
Mauser Bolt Action ShopManual M91 Through M98
GreatBook for Mauser info $ 49.95
Checkour Selection of Mauser parts at
Mauser Parts
[ Home | Catalog| About Us | News/Specials| Links | ContactUs ] |
© All Textand Photos Copyright 1999-2020 Hoosier Gun Works || Site created by HGW |
How To Date A Spanish Mauser For Sale
I am needing to find out the value of what appears to be a good condition spanish FR8 mauser chambered in .308. The guy who is wanting to sell it to me says the bore is good, but has some minor pitting and the bolt matches the receiver. He also told me that the furniture looks good / decent as well. I normally don't deal with or play with bolt action rifles much, but I've always wanted an FR8 and I need to know a fair price before I go throw down the cheese for it.
I have pics and will post them shortly.
What's a fair price??
Thanks in advance!